To perform the measurement of various profiles e.g. cylinder, cone, etc.

Experiment No. : 11

Aim:

To perform the measurement of various profiles e.g. cylinder, cone, etc

Machine:

Phoenix Coordinate Measuring Machine.

Tool Used:

5mm Probe, Stylus, Profiles.

Procedure:

  1. Open the software after switching ON the machine.
  2. Click on MOTOR ON.
  3. Click on HOME ALL.
  4. Touch the Stylus number of times as per the instructions appearing on the screen.
  5. Select the profile to be measured from the MEASUREMENT Option.
  6. Select the CYLINDER Option from Measurement Option.
  7. Touch the specimen using TOUCH PROBE as displayed on the screen and as per the instruction appearing on the screen.
  8. The final measurement will be displayed on the screen.

Result:

The dimension o of the cylinder will be measured using the touch probe and final reading will appear on the screen.

Previous
Next